Black & Decker WM425 Customer reviews

Ratings

Category: Tools & Home Improvement
Brand: Black & Decker
Model: WM425
Availability: In Stock. Ships next business day.
List Price : ~~N/A~~
Discount: Check Price Here!

Black & Decker WM425 Review

Black & Decker WM425 Review by Eric Antonow (Palo Alto, CA United States)

Deserves a spot in the design hall of fame, this well-constructed foldable bench is responsible for saving thousands of dining room chairs and picnic tables from their accidental scaring and destruction. No longer will you drill through your wood project and into the kitchen countertops, gone are the days where you very foolished used you knee to balance the board you were cutting with the radial saw. The vise is very useful for clamping small glue jobs -- though often not wide enough anything larger -- and serves and an extra pair of hands when you need them most.
The extra 40 bucks (vs the WM225) buys you slightly sturdier construction (though I haven't had a problem in 10yrs) and the ability to create a vertical vise/grip. It's not a bad feature to have for certain kinds of fine wood working projects -- but at that point I suspect you're better off getting a permanent work bench. At the same time, I've rarely longed for it.

Black & Decker WM425 Review by E. Shonts "Shontsy" (MI)

No, I don't work for BD, nor does anyone I am related to. I have NO stake in the company. I'm just a mechanically inclined person who likes tools, knows how to use them, and probably spends too much time thinking, reading and opining about them. And, here I go again...

Regarding all the comments about the drive belt slipping, IT'S SUPPOSED TO DO THAT, you morons!! Oops, did I say that out loud? Anyway, the belt WILL NOT BREAK from this slipping. The original Workmates didn't have that feature, which made the user crank both handles, everytime, ALL the time. The SLIPPING plastic belt is there to speed up the process by homing both sides of the vise jaws against the workpiece, so you THEN can TIGHTEN both vise screws USING TWO HANDS. It's a speed and convenience feature, not a way to torque both sides with one handle. All of the people who complained about the poor instructions were coincidentally the same people who did a likewise poor job of reading them, I guess. Certainly, it can't be any fault of theirs the darn thing doesn't work exactly as they misconceive it should!

Aside from being stamped steel instead of cast aluminum, this modern version is every bit as functional as the originals, if not as cool. Yes, they cheaped it up, but the same parts are there, doing the same jobs, just for less money. If they were still cast aluminum, they'd probably be $200 or $300 these days.

You don't fully appreciate the brilliance of the Workmate until you read about it and it's inventor in the book "The Workbench Book" by Scott Landis. It sounds silly, but it is truly a riveting story of a young English guy living in an apartment, who needed a workbench, and then persisted when everyone turned him down, to create one of the best selling, most unique, long-lived tools ever. It's genius! And you'll see pictures of many of the various versions of the Workmate that have existed. The first few prototypes are a riot. Hard to believe he went from those to this, but he did!
Check your local library for a copy of the book, or buy it right here on amazon.
http://www.amazon.com/gp/product/1561582700/103-9694295-6840628?v=glance&n=283155&s=books&v=glance

In conclusion, the Workmate 425 is an amazing tool. I'm less enthustiastic about the smaller versions, and versions with idendity crises like the WM525, but the 425 and older models that look the same are awesome. And it's a great tool stand.

When I was younger, I used to think the Workmate was the dumbest thing I'd ever seen. I wouldn't have been caught dead using this Father's day nightmare gimmick of a gift. But after reading The Workbench Book, I bought one. I use mine alot more than even I thought I would or could, and it never ceases to amaze me the things I can do with it, with a little creative thought. After myself, it's the most versatile tool in my shop. In fact, I'm planning to buy another one right now. If only I could find one of those retro-cool cast aluminum jobs! No luck so far! Can't even find one for sale, ebay or elsewhere. And I've been looking on and off for about 2 years. Does that tell you ANYTHING? It should.

Aside from the few walking human safety hazards that have reviewed this product here on Amazon, most of what has been said is true. The box the 425 comes in is HORRIBLE, and falls apart in shipping, or even when trying to get it out of the trunk of the car and into the garage. But you don't use the box, do you? Yes, it can be a little time consuming to put together, but you'll get there. Don't tighten the bolts for the top until you get them ALL on, and clamp the vise screws down tight. Then the table boards will align to each other, and you can final torque the fasteners.

But the guy who keeps dropping it on his foot needs to stay out of the garage before he hurts someone. It's a physical impossiblity for this product to fall down with the extension feet properly extended, which is sure not difficult to figure out. Rotate them outward until they stop! Get real! Not to mention anther comment, "I was dissapointed because the top in the picture looks like some sort metal and mine was wood?" You're a WHAT enthusiast? After reading these reviews, I truly pity people and companies that sell consumer products, don't you?! How can you not?

Black & Decker WM425 Review by dxg (Michigan)

This is an OK product with several major caveats. Don't buy mail order. It will arrive damaged. The packaging is nonexistent and the plastic fittings on the underside of the boards will break in shipping. I've done it twice. If you must have it, buy from a retailer and check everything before you take it home.
As a product for fixed home use it's OK. For taking to work sites, it's too heavy and awkward to fold, unfold and carry. Also, the plastic fittings that don't make it through shipping may not make it bouncing around in your truck. They are not very sturdy.
A better choice is the Craftsman (the more expensive one). It has telescoping legs and is easier to fold and carry. The top boards are melamine, but you can make your own hardwood boards. The best pegs/clamps for these workstands are the ones that come with the Skil workstand sold at Lowe.

More Reviews...

Black & Decker WM425 Workmate 425 550-Pound Capacity Portable Workbench:: Features

One-handed clamp system allows for independent jaw adjustment
Workmate transforms into a roomy workbench or bench tool stand
Measures 29.2 by 8.9 by 29.5 inches
Heavyweight steel design holds up to 550 pounds
Includes four swivel pegs, extra block, and vise-to-workbench converter insert
Item Dimensions: 29 x 9 x 30 inches; 0 pounds
Brand: Black & Decker
Model: WM425
Product Type: Tools & Home Improvement

Black & Decker WM425:

Tags : Buy Black & Decker WM425, Best Buy Black & Decker WM425 Lowest Price, Black & Decker WM425 On Sale, Black & Decker WM425 Review, Great Deals Black & Decker WM425, Cheap Black & Decker WM425. See also:

Porter-Cable FR350A Reviews
DEWALT DW087K Review
Ingersoll-Rand 2135TIMAX Product reviews
DEWALT DW745 Customer reviews
DEWALT DC618K On Sale!
Milwaukee 2601-22 Reviews
Bosch PR20EVSK On Sale!
Easy Heat ADKS-1000 Sale!
Weller WESD51 Best deals!
Everpure EV9270-71 Product reviews
Senco PC1010 Compressor Reviews
DEWALT DW368 Customer reviews
DEWALT DW1269 Free Shipping !
Black & Decker VEC026BD Best price!
Control Products FA-I-CCA Great Offer!

Mihangel Way blog

Thursday, December 1, 2011